How To Clean Corrugator Belt?
It is better to clean the corrugator belt once time per month.
Here are some detail steps:
1. Keep the machine running with slow speed;
2.Make the corrugator belt fully moist by water or low pressure steam spray with much water content;
3.Put into some detergent and clear up the dirt & paste scar with soft brush;
4. After cleaning,using water to wash the belt again;
5.During the washing process,it will be greatly help to lay out shallow U-shaped iron plate or shallow groove under the corrugator belt.It will makethe cleaning waterflow out to the machine outside,keep the heating panel clear and no any corrosion;
6.When necessary, you can turn on steam to heat the heating panel and make the wet corrugator belt drying with slow speed.