280CR Fingerless Single Facer

Single-Facer

►Structure and Features:

1.Design Speed :100m/min Width :1400mm-2200mm

2.Corrugating roller:  dia 280mm

3.Drive reducer box with oil immersed type lubricating to reduce noise keep running stables

Adopt gimbal trasmission .separate power

4.Corrugating roller ,pressure roller and glue roller by pneumatic adjustment

5.Cardboard transmit adpot vacuum suction method ,with wind control system , keep flute

Profiles stable of the lower -roller in the condition of running up .

6.Bearing of corrugated and pressure roller adpot high temperature lubricate grease

7.Glue parts auto supply glue circularly

8.The upper – lower corrugating roller are made of 48CrMo high quality alloy steel ,

after heat-treatment .The hardness HRC58-60, the surface be grinded .

9.The glue part surface are treated by special mesh snicked and chromeplated .

10.Motorized or manual glue width dividing to match the paper width

11.Glue part can be running independently or non-indepently while stopped .

Adopt main motor frequency conversion control(optional)

320/360 CR Fingerless Single Facer

320/360 CR Fingerless Single Facer

►Structure and Features:

1.320CR Design Speed :150m/min 350CR Design Speed :180m/min

2.Width :1400mm-2200mm

3.Corrugating roller: dia 320mm /360mm

4.Drive reducer box with oil immersed type lubricating to reduce noise keep running stables

Adopt gimbal trasmission .separate power

5.Corrugating roller ,pressure roller and glue roller by pneumatic adjustment

6.Cardboard transmit adpot vacuum suction method ,with wind control system , keep flute

Profiles stable of the lower -roller in the condition of running up .

7.Bearing of corrugated and pressure roller adpot high temperature lubricate grease

8.Glue parts auto supply glue circularly

9.The upper – lower corrugating roller are made of 48CrMo high quality alloy steel ,after heat-treatment .

The hardness HRC58-60, the surface be grinded .

10.The glue part surface are treated by special mesh snicked and chromeplated .

11.Motorized or manual glue width dividing to match the paper width

12.Glue part can be running independently or non-indepently while atopped .